VIDEO
Travel Entertainment
Video unit
TEV-501
Operating and installation instructions
1
2
3
5
4
6
7 89 :
;
<
=
>
D
?@ABC
3
CONTROLS
1
2
Video input VIDEO IN
Audio input, left channel
AUDIO IN L
3
4
5
Audio input, right channel
AUDIO IN R
Headphone output 1
HEADPHONE 1
Headphone output 2
HEADPHONE 2
6
7
On/off button POWER
Volume control, quieter
VOLUME, picture controls
8
Sequence switch for setting
contrast, brightness, colour and
tint PICTURE
9
:
;
Volume control, louder
VOLUME, picture controls
Infrared receiver for remote
control, optional SENSOR
Stop button, eject cassette from
the unit STOP/EJECT
<
=
>
?
Fast rewind button REWIND
Playback button PLAY
Fast forward button FFWD
Input for 12-volt direct current
DC 12V
@
A
Video input VIDEO IN
Audio input, left channel
AUDIO IN L
B
C
D
Audio input, right channel
AUDIO IN R
Output for an external monitor
AV OUT
Input for an optional television
receiver
13
CONTENTS
Notes...................................... 15
Securing and installing
the TEV-501............................ 16
Before using for the first time......... 16
Securing the TEV-501
between the front seats ................. 17
Operating the TEV-501 in buildings . 18
Operating the TEV-501........... 18
Switching the TEV-501 on/off ........ 18
Playing a video cassette ................ 18
Inserting a video cassette........... 18
Removing a video cassette......... 18
Playing a video cassette ............. 18
Fast tape winding....................... 19
Connecting external sources
(games consoles, DVD players
and television receivers) ................ 19
Connecting a games console/
DVD player to the TEV-501 ........ 19
Connecting an external monitor .. 19
Connecting a television
receiver to the TEV-501 ................. 19
Headphone connection.................. 19
Adjusting the volume ..................... 20
Adjusting the picture...................... 20
Adjusting the contrast ................ 20
Adjusting the brightness............. 20
Adjusting the colour ................... 20
Adjusting the tint ........................ 20
Technical data ........................ 21
14
NOTES
Thank you for deciding to use a Blau-
punkt product. We wish you a lot of fun
with your new piece of equipment.
To ensure that the TEV-501 is well
ventilated, only operate the unit with
the case opened.
Before operating the TEV-501 (Travel
Entertainment Video) unit for the first
time, please read these operating
instructions carefully and keep them in
theTEV-501’s case for future reference.
Please observe the following safety
instructions to ensure you operate the
TEV-501 safely and in a manner that
will not be of danger to anyone.
Only use the supplied power supply
unit. Always disconnect the power
supply from the socket or cigarette
lighter first, before disconnecting the
cable from the TEV-501.
Never touch the unit with moist
hands.
To clean the unit, only use a dry, lint-
free cloth. Never use harsh cleansing
agents or thinners.
The TEV-501 must be connected
to a switched power supply (e.g. the
cigarette lighter) and must not be
connected directly to the vehicle
battery. To avoid the battery running
flat, disconnect the TEV-501 from the
power supply when not in use.
Danger of electric shock. Never open
the unit’s housing. It does not contain
any components that can be
serviced by the user.
Remove the video cassette from the
unit when not in use.
The TEV-501 must always be
secured in its case using the Velcro
straps. Fasten the unit to the eyelets
at the side.
Ensure that the unit is attached and
secured in accordance with these
operating instructions.
The S-hooks and all the straps must
be attached and fastened correctly
to avoid the unit causing injury in the
event of an accident.
15
SECURING AND INSTALLING THE TEV-501
Securing and installing
the TEV-501
Before using for the first time
➮ Open the lower storage
compartment of the TEV-501’s
case, and remove the cigarette
lighter adapter and the four straps.
➮ Close the lower storage
compartment.
➮ Remove the unit from its case.
➮ Thread the adapter cable through
the opening in the case.
➮ Connect the plug to the DC 12V
input of the TEV-501.
➮ Place the unit back into the case.
➮ Secure the TEV-501 using the
Velcro straps located inside the
case by threading the Velcro straps
through the eyelets on the side of
the unit.
DC 12V
16
SECURING AND INSTALLING THE TEV-501
Securing the TEV-501 between
the front seats
➮ Take one of the straps that does
➮ Repeat this procedure for the
not have an S-hook attached.
passenger seat.
➮ Place the strap around one of the
headrest supports on the driver
seat.
➮ Now take one of the straps that
does have an S-hook attached.
➮ Connect the buckle of the S-hook
strap with one of the buckles at the
lower end of the case.
➮ Fasten the belt around the
headrest support using the two
buckles.
➮ Place the strap around the seat rail
of the driver seat or the lower
safety belt attachment point.
➮ Connect one of the strap’s buckles
to the corresponding buckle on the
side of the bag. You can adjust the
length of the strap to suit the
➮ Thread the strap through the S-
hook.
conditions in the vehicle interior.
➮ Pull the strap tight.
17
OPERATING THE TEV-501
➮ Repeat this procedure for the
Operating the TEV-501
passenger seat.
Switching the TEV-501 on/off
➮ Open the case’s upper lid.
➮ Flip up the monitor.
➮ Press the POWER button to switch
the TEV-501 on/off.
➮ Open the zip fasteners at the front
of the case. The unit is angled at
around 15°. Close the zip fasteners
until the unit is set at an angle that
you find convenient.
Playing a video cassette
Note
The TEV-501 is designed to play
standard consumer video cassettes of
the VHS variety (Video Home System).
Never try inserting other cassettes other
than VHS cassettes into the TEV-501.
Suitable VHS video cassettes are
labelled with the VHS symbol. Blau-
punkt-Werke cannot accept any liability
for damage that may occur from using
other video cassettes in this unit.
Operating the TEV-501 in
buildings
➮ Place the unit on a secure and
level surface.
➮ Open the lower storage
compartment in the TEV-501’s
case, and remove the power
supply unit.
Inserting a video cassette
➮ Carefully insert a video cassette
with its printed side uppermost and
its flap side first into the cassette
compartment of the TEV-501.
➮ Connect the output of the power
supply unit to the DC 12V input of
the TEV-501.
➮ Connect the mains power cable to
a 220-volt socket.
Removing a video cassette
➮ With playback stopped, press the
STOP/EJECT button.
Playing a video cassette
➮ To begin playback, press the PLAY
button.
Note
Video cassettes will be played
automatically if their recording protection
mechanism has been activated.
18
OPERATING THE TEV-501
Fast tape winding
➮ First switch on the games console.
➮ Now switch on the TEV-501.
To enable an external source to output
on the TEV-501,
To fast forward the tape,
➮ Press the FFWD button.
To fast rewind the tape,
➮ Press the REW button.
➮ Press the STOP button.
Connecting an external monitor
Connecting external sources
(games consoles, DVD players
and television receivers)
You can connect a monitor to the TEV-
501 in order to output to this monitor.
➮ Connect an external monitor or
television to the AV OUT
You can connect up to two external
video and audio sources to theTEV-501
(e.g. a games console or DVD player),
and use the monitor and loudspeakers
for the output. The TEV-501 has two
separate inputs for video signals and
stereo audio signals. The inputs are
located on the front and back of theTEV-
501. If all the inputs are in use, the TEV-
501 gives priority to the inputs at the
front of the unit.
connection on the TEV-501.
Connecting a television receiver
to the TEV-501
There is a 32-pin connection at the back
of the TEV-501 to allow you to connect
the optionally available TET-01
television receiver. If you want to
purchase a television receiver for the
TEV-501, please contact a Blaupunkt
dealer.
Connecting a games console/DVD
player to the TEV-501
Headphone connection
There are two 3.5 mm headphone
connections at the front of the TEV-501
➮ Use a suitable cable to connect a
games console/DVD player to the
VIDEO IN, AUDIO IN L and
AUDIO IN R inputs at the front or
back of the TEV-501.
labelled HEADPHONE
1
and
HEADPHONE 2. You can connect
headphones to either of these jacks. If
you connect a headphone to the
HEADPHONE 1 jack, the unit’s internal
loudspeakers will be deactivated. If you
only connect up the HEADPHONE 2
jack, sound will be outputted
simultaneously over the internal
loudspeakers.
To avoid damage to theTEV-501
and the games console, make
absolutely certain that the cable
colours match the jack colours on the
units.
19
OPERATING THE TEV-501
Adjusting the colour
Adjusting the volume
To adjust the colour of the monitor,
To increase the volume,
➮ Repeatedly press the PICTURE
button until COLOR appears in the
display.
➮ Press the right VOLUME button.
To decrease the volume,
➮ Press the left VOLUME button.
➮ Adjust the colour using the two
VOLUME buttons.
Whilst you are making your
adjustments, a symbolic representation
of the volume level appears in the
display.
Adjusting the tint
To adjust the tint of the monitor,
➮ Repeatedly press the PICTURE
button until TINT appears in the
display.
Adjusting the picture
Adjusting the contrast
To adjust the contrast of the monitor,
➮ Press the PICTURE button.
CONTRAST appears in the display.
➮ Adjust the tint using the two
VOLUME buttons.
➮ Adjust the picture contrast using
the two VOLUME buttons.
Adjusting the brightness
To adjust the brightness of the monitor,
➮ Repeatedly press the PICTURE
button until BRIGHTNESS appears
in the display.
➮ Adjust the brightness using the two
VOLUME buttons.
20
TECHNICAL DATA
Technical data
Television standard
PAL/NTSC/ME
SECAM/SECAM L
Diagonal image size
Approx. 12.4 cm
(5 inches)
Audio tracks
Tape width
1
12.7 mm
Tape speed SP
33.35 mm/s
Fast tape winding
Less than 7 minutes
for a 120-minute
cassette
Video output
1.0 Vp/p, 75 ohms,
unbalanced
Video S/N
Audio power
Audio S/N
Better than 40 dB
2 x 0.5 W
Better than 40 dB
Electrical power supply
DC 12 V,
AC 100 - 240 V/
50 - 60 Hz
Power consumption
18 W
Permissible air humidity
10-75%
Permissible temperature range
-20° to +60° Celsius
(W x H x D)
275 x 345 x 125 mm
Dimensions
21
Service-Nummern / Service numbers / Numéros du service après-
vente / Numeri del servizio di assistenza / Servicenummers /
Telefonnummer för service / Números de servicio / Número de
serviço
Tel.:
Fax:
Deutschland
Belgique / België
France
Nederland
Great Britain
Danmark
Sverige
0 18 05 00 02 25
0 25 25 54 44
014 010 70 07
023 565 63 48
018 958 383 66
44 89 83 60
0 51 21 49 40 02
0 25 25 54 48
014 010 73 20
023 565 63 31
018 958 383 94
44 89 86 44
08 750 15 00
66 81 70 00
08 750 18 10
66 81 71 57
Norge
Suomi
Österreich
094 359 91
01-6 10 39-0
015 762 241
094 359 92 36
01-6 10 39-391
015 769 473
âeská republika
USA
Singapore
Slovensko
026 130 04 41
800-266 25 28
006 535 054 47
042 175 873 212
026 130 05 14
708-681 71 88
006 535 053 12
042 175 873 229
Blaupunkt-Werke GmbH
Bosch Gruppe
10/00
K7/VKD 8 622 402 656
|