Mobile Workstation!
5" & 8" skid steer Chippers!
The four-position valve easily controls
the hydraulic feed roller
The chipper has two mounts, so it can be
set to feed in front or to the curb side
Model CH500H (74500)
Model
Hydraulics
Feed Opening
Size
Chipper
Capacity
Feed
System
Chipper
Disc
Operating
Weight
CH500H Standard or
(74500) high-flow**
5.5"x7"
3"*
hydraulic
20" x 1.25"
140lbs
1145
CH800H High-flow***
(74800)
9"x9"
5"*
hydraulic
30" x 1.25"
275lbs
1525
*Continuous chipping size rating refers to the suggested feeding size of limbs for normal operation
**Standard-flow requires a mimimum of 15 gallons per minute (GPM) hydraulic oil flow
Built-in hydraulic jack makes feed roller
maintenacnce quick and easy.
***High-flow requires a mimimum of 25 GPM hydraulic oil flow
Find a dealer near you!
Call us at 800.247.7335 or
P.O. Box 849, West Fargo, ND 58078
Email: sales@BearCatProducts.com
Fax: 701.282.9522
|
Memorex 53954739 User Manual
Kenwood KDC X7533U User Manual
Kenwood KDC 6020 User Manual
Jura Capresso X7 S User Manual
IBM ULTRABAY 2000 User Manual
Huawei Technologies Cell Phone P6 User Manual
Hitachi Travelstar HTE727550A9E364 User Manual
Fujitsu MCJ3230AP User Manual
Fujitsu Computer Drive MAP3367NC User Manual
APC 230 VAC User Manual