™
DuraSpin Cordless Screw Driver
Model DS162-14v
Applications:
Made Exclusively for
DRYWALL
Drywall (to wood or steel studs).
Features and Benefits:
• 14.4 volt battery provides the optimum balance of power,
weight and run-time across the full range of screws
• 4,000 RPM high-speed motor drives screws FAST!
• Patented clutch design means long-lasting durability
• One-hour charger and extra battery ensures a backup battery
with a full charge
NEW!
• Easy depth-of-drive adjustment regulates the precise
amount of countersink
• Easy bit change
Designed for high-speed screw fastening in drywall applications,
the DuraSpin DS162-14v drives screws from 1" to 1 5⁄8" long.
• Belt hook — DuraSpin goes where you go
• One full year warranty
Fastener Specifications:
Screw Lengths: 1" (25 mm) to 1 5/8" (41 mm)
Screw Diameters: #6
Drywall
to Wood
Drywall to
Light Gauge Steel Heavy Gauge Steel
Drywall to
Application:
Drive/Head:
#2 Phillips
#2 Phillips
#2 Phillips
Bugle
Bugle
Fine
Bugle
Fine
Thread:
Point:
Coarse
Sharp
Sharp
Drill
Tool Specifications:
Grey
Phosphate
Grey
Phosphate
Clear
Zinc
Finish:
Screw:
Voltage: 14.4 volts
Battery Ampacity: 1700 mAh
RPM: 4000 rev/min
Weight: 4.9 lbs. (2.2 kg)
Height: 10 inches (254 mm)
Length: 13.8 inches (350 mm)
Width: 2.8 inches (70 mm)
Recharge Time: 1 hour
#6 X 1"
#6 X 11/4
"
#6 X 11/4
"
#6 X 11/4
"
Screw Drives/Charge: see chart on reverse side
Fastener Capacity: 50 screws (one strip)
Torque Delivered: 25 in-lbs
Generated Noise: 74 dBA
#6 X 15/8
"
Vibration: less than 2.5m/sec2
|