Power Drive Marine Battery RPPD1000 User Manual

Technical/Additional  
Information  
RPPD1000 PowerDrive 1000 WaPower Inverter  
Here are some addional ps, to help you get the best performance  
from your PowerDrive 1000 wainverter.  
1. Save your receipt, you will need this if you ever need warranty service.  
2. If you need to extend the length of the stock cables (36” 4 gauge are included), you must use a larger gauge  
wire. (2 gauge is recommended up to 6 feet. Over 6 feet Ø gauge.)  
3. Do not use extension cords or mul-taps on the inverter. One device per outlet.  
4. Supply plenty of fresh air. A hot inverter will not be able to supply full power and will shut down if it be-  
comes too hot. It is best to mount it in a locaon that is cool, like the passenger cab, away from an outside  
wall, and not in a cargo box.  
5. Mount/store in a dust free environment. A build up of dirt will keep the inverter from being able to cool  
properly.  
6. The power consumpon formula for was and amps is:  
(volts X amps = was) or (was ÷ volts = amps)  
If you want to add fuses to your inverter: 1000 was ÷ 12 volts = 84 amps. We recommend a  
“T” fuse.  
If you can use your refrigerator with the inverter, look on the refridgerator for the amperage rat-  
ing on the compressor motor, for example 7.5 amps: (120 volts X 7.5 amps = 900 was) NOTE:  
Appliances with compressors may need three to four mes the running power for start-up.  
Microwaves are sold adversing their cooking power, not the amount of power they consume.  
A 900 wamicrowave may use more, or less than 900 was. Consult your owner’s manual, or  
the back of the microwave oven for power consumpon. (was or amps)  
7. Keep in mind that for the inverter to run at full power for an extended period of me, the inverter must be  
supplied with full power. With a 1000 wainverter that means 84 amps, most alternators are not that  
powerful.  
Think of the baery as a bath tub, water (power) is going down the drain to the inverter, at the same me  
water (power) is lling the tub (baery) from the spigot, (alternator) if the power ow going out is greater  
than the power ow coming in, eventually the tub (baery) will be empty, and the inverter will cease to work  
properly.  
©2009 PowerDrive a RoadPro Family of Brands  
Contact PowerDrive by calling tool free 866-622-7979 8:30am — 5:00pm EST or e-mail [email protected]  
RPPD1000AMD0809  
 

Peavey Electronic Keyboard pRP 6 User Manual
Pelco Computer Drive 06 User Manual
Pelco TV Mount C2230M User Manual
Philips CD Player AJ3150 User Manual
Philips Satellite TV System SDV2750 27 User Manual
Philips Satellite TV System SDV7400K 17 User Manual
Pride Mobility Mobility Aid Jazzy 1103 User Manual
Prince Castle Toaster 454 B User Manual
ProForm Elliptical Trainer PFEL26050 User Manual
ProForm Treadmill PFTL698060 User Manual