Marshall electronic Digital Photo Frame CV340 User Manual

OPERATION GUIDE  
Models:  
CV340 Series  
CV500 Series  
Please read this guide carefully before installaing and using the camera.  
Please retain this guide for reference.  
 
INFORMATIONMFEONRUUSSTERRUCTURE  
MENU STRUCTURE  
LENS  
DC  
OUTDOOR, INDOOR  
SPECIAL CAM TITLE  
VIDEO  
MANUAL  
EXPOSURE SHUTTER  
D-EFFECT  
MOTION  
FREEZE  
MIRROR  
D-ZOOM  
NEG.IMAGE  
SELECT  
DISPLAY  
SENSIVITY  
MOTION VIEW  
DEFAULT  
SELECT  
AUTO  
1/30sec ~ 1/50,000sec, x2~x30  
LOW, MIDDLE, HIGH  
AUTO (x20 ~ X30)  
OFF  
AGC  
SENSE-UP  
BRIGHTNESS 1 ~ 100  
D-WDR (ACCE) OFF, LOW, MIDDLE, HIGH  
DEFOG  
BACKLIGHT  
PRIVACY  
OFF, LOW, MIDDLE, HIGH  
BLC  
HSBLC  
OFF  
DISPLAY  
COLOR  
DEFAULT  
LANGUAGE  
DEFECT  
WHITE  
BALANCE  
ATW  
LIVE DPC  
LEVEL  
STATIC DPC  
START  
LEVEL  
AWC-SET  
INDOOR  
OUTDOOR  
MANUAL  
AUTO  
1 ~ 100  
DELAY  
D-->N (AGC)  
N-->D (AGC)  
DAY  
&
SENS-UP  
RS485  
VERSION  
SHARPNESS  
NIGHT  
COLOR  
B/W  
ADJUST  
SHARPNESS  
LEVEL  
RESOLUTION  
LCD  
CRT  
BURST  
IR SMART  
IR LED  
IR PWM  
MONITOR  
OSD  
EXT  
2DNR  
3DNR  
TEXT COLOR  
OUTLINE  
NR  
S-LEVEL: 0 ~ 100  
E-LEVEL: 0 ~ 100  
0 ~ 100  
LSC  
NTSC/PAL  
LEVEL  
SMART IR  
RESET  
EXIT  
ON, OFF  
 
1080 HD-SDI Camera  
2
3
1080 HD-SDI Camera  
OSD Joystick and Button  
LENS  
MANUAL, VIDEO, DC  
Select LENS using the UP or DOWN button.  
You can change between MANUAL, VIDEO and DC using the LEFT or RIGHT button.  
MANUAL: Manual Lens (Fixed focal or fixed IRIS lens)  
VIDEO: Auto Iris Varifocal Lens.  
DC: DC Auto Iris Varifocal Lens.  
You can change the DC mode between INDOOR mode and OUTDOOR mode using the LEFT  
or RIGHT button.  
INDOOR: Select for indoor installation.  
OURDOOR: Select for outdoor installation.  
SETUP  
DC LENS MODE  
1. LENS  
DC  
DC  
RETURN  
INDOOR  
RET  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
ATW  
AUTO  
Press SET button to access the SETUP menu.  
6. SPECIAL  
7. ADJUST  
8. RESET  
Select each sub-menu by using the UP, DOWN, LEFT, and RIGHT buttons.  
Press the SET button to select.  
9. EXIT  
SETUP  
Use the UP & DOWN buttons  
to select the desired item.  
1. LENS  
DC  
Use the LEFT & RIGHT buttons  
to change the sub-item.  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
ATW  
AUTO  
6. SPECIAL  
7. ADJUST  
8. RESET  
9. EXIT  
Icon indicates “Press OSD Button” or “Enter Sub Menu”.  
Icon indicates “Not Available”.  
 
1080 HD-SDI Camera  
4
5
HD-SDI 1080p Camera  
EXPOSURE  
SHUTTER  
EXPOSURE  
AGC  
Select EXPOSEURE using the UP or DOWN button.  
Select EXPOSEURE using the UP or DOWN button.  
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and  
BACKLIGHT menu using the UP or DOWN button.  
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and  
BACKLIGHT menu using the UP or DOWN button.  
SHUTTER: You can adjust the shutter speed of the lens.  
AGC(AUTO GAIN CONTROL): A function which controls the amplification/  
gain process automatically if the illumination falls under the usable level.  
You can adjust the shutter speed manually or select shutter speed mode from FLK or AUTO  
mode using the LEFT or RIGHT button.  
You can adjust the AC level from LOW, MIDDLE, or HIGH using the LEFT and RIGHT button.  
FLK: Select this when you experience picture flicker, this happen when  
there is a clash with the installed lighting frequency.  
AUTO: Enable AUTO to control the shutter speed automatically. If AUTO  
is selected, the shutter speed is automatically controlled depending on  
the ambient illumination of the subject.  
LOW: Allows automatic gain control from 5.3dB to 20dB.  
MIDDLE: Allows automatic gain control from 5.3dB to 26dB.  
HIGH: Allows automatic gain control from 5.3dB to 32dB.  
1/30sec ~ 1/50,000sec, x2~x30: You can control shutter speed manually  
using the LEFT or RIGHT button.  
SETUP  
EXPOSURE  
1. LENS  
DC  
SHUTTER  
AGC  
SENS-UP  
BRIGHTNESS  
DWDR(ACCE)  
DEFOG  
AUTO  
HIGH  
AUTO  
------45  
OFF  
OFF  
OFF  
RET  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
ATW  
AUTO  
SETUP  
EXPOSURE  
1. LENS  
DC  
SHUTTER  
AGC  
SENS-UP  
BRIGHTNESS  
DWDR(ACCE)  
DEFOG  
AUTO  
HIGH  
AUTO  
------45  
OFF  
OFF  
OFF  
RET  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
BACKLIGHT  
RETURN  
ATW  
AUTO  
9. EXIT  
BACKLIGHT  
RETURN  
9. EXIT  
■ If the shutter mode is set to AUTO, carefully position the camera during installation since  
the produced image might be poorly framed due to a bright light source.  
■ If the gain control (AGC) of EXPOSURE mode is set to OFF, SENS-UP mode is accordingly  
set to ‘- - -‘.  
■ When the SHUTTER is set to MANUAL or FLK mode, SENS-UP will be disabled.  
 
1080 HD-SDI Camera  
6
7
1080 HD-SDI Camera  
EXPOSURE  
SENS-UP  
EXPOSURE  
BRIGHTNESS  
Select EXPOSEURE using the UP or DOWN button.  
Select EXPOSEURE using the UP or DOWN button.  
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and  
BACKLIGHT menu using the UP or DOWN button.  
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and  
BACKLIGHT menu using the UP or DOWN button.  
BRIGHTNESS: Adjust the screen brightness.  
SENS-UP: When it is in low luminance condition, the camera automatically  
You can adjust the brightness level from 1 ~ 100 using the LEFT or RIGHT button.  
detects the light level and maintains a clear picture quality if this mode is activated.  
You can select the sense-up mode from OFF or AUTO mode using the LEFT or RIGHT button.  
OFF: Deactivates the SENS-UP function.  
SETUP  
EXPOSURE  
1. LENS  
DC  
AUTO: Activates the SENS-UP function.  
SHUTTER  
AGC  
SENS-UP  
BRIGHTNESS  
DWDR(ACCE)  
DEFOG  
AUTO  
HIGH  
AUTO  
------45  
OFF  
OFF  
OFF  
RET  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
ATW  
AUTO  
SETUP  
EXPOSURE  
1. LENS  
DC  
SHUTTER  
AGC  
SENS-UP  
BRIGHTNESS  
DWDR(ACCE)  
DEFOG  
AUTO  
HIGH  
AUTO  
------45  
OFF  
OFF  
OFF  
RET  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
BACKLIGHT  
RETURN  
ATW  
AUTO  
9. EXIT  
BACKLIGHT  
RETURN  
9. EXIT  
SENS-UP  
SENS-UP  
RETURN  
x8  
RET  
■ Higher BRIGHTNESS setting may cause noise, spots, or white image.  
■ Ghosting in object movements may occur if the sens-up is set to higher level.  
 
1080 HD-SDI Camera  
8
9
1080 HD-SDI Camera  
EXPOSURE  
DWDR(ACCE), DEFOG  
BACKLIGHT  
Select EXPOSEURE using the UP or DOWN button.  
Select EXPOSEURE using the UP or DOWN button.  
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and  
BACKLIGHT menu using the UP or DOWN button.  
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and  
BACKLIGHT menu using the UP or DOWN button.  
DWDR(ACCE) : DWDR(ACCE) illuminates darker areas of an image while  
retaining the same light level for brighter areas to even out the overall brightness  
of images with high contrast between bright and dark areas.  
BACKLIGHT: BACKLIGHT will help distinguish an object in front of the strong  
background lighting.  
You can select the BACKLIGHT mode from OFF, BLC, or HSBLC using the LEFT or RIGHT button.  
You can select the DWDR level from OFF, LOW ,MIDDDLE, or HIGH using the LEFT or  
RIGHT button.  
OFF: Disable BACKLIGHT mode.  
BLC: Enables a user to select a desired area on a picture and view that  
area more clearly.  
SETUP  
EXPOSURE  
1. LENS  
DC  
SHUTTER  
AGC  
SENS-UP  
BRIGHTNESS  
DWDR(ACCE)  
DEFOG  
AUTO  
HIGH  
AUTO  
------45  
OFF  
OFF  
OFF  
RET  
GAIN: Adjust level of the BLC function.  
You can select the GAIN level from LOW, MIDDLE, and HIGH using the LEFT or RIGHT button.  
AREA: Select the area to be enhanced.  
You can select the BLC area using the UP, DOWM, LEFT or RIGHT button.  
DEFAULT: Set the BLC setting value as default.  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
ATW  
AUTO  
BACKLIGHT  
RETURN  
SETUP  
BACKLIGHT  
9. EXIT  
1. LENS  
DC  
SHUTTER  
AGC  
SENS-UP  
BRIGHTNESS  
DWDR(ACCE)  
DEFOG  
AUTO  
HIGH  
AUTO  
------45  
OFF  
OFF  
BLC  
RET  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
ATW  
AUTO  
DEFOG: DEFOG feature will help increase visibility in extreme weather conditions,  
such as fog, rain or in a very strong luminous intensity.  
BACKLIGHT  
RETURN  
You can select the DEFOG level from OFF, LOW MIDDLE, or HIGH using the LEFT or  
RIGHT button.  
9. EXIT  
SETUP  
EXPOSURE  
1. LENS  
DC  
BLC  
SHUTTER  
AGC  
SENS-UP  
BRIGHTNESS  
DWDR(ACCE)  
DEFOG  
AUTO  
HIGH  
AUTO  
------45  
OFF  
OFF  
OFF  
RET  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
GAIN  
AREA  
DEFAULT  
RETURN  
MIDDLE  
RET  
ATW  
AUTO  
POSITION  
BACKLIGHT  
RETURN  
9. EXIT  
 
1080 HD-SDI Camera  
10  
11  
1080 HD-SDI Camera  
EXPOSURE  
BACKLIGHT  
WHITE BALANCE  
Select EXPOSEURE using the UP or DOWN button.  
You can select SHUTTER, AGC, SENS-UP, BRIGHTNESS, DWDR (ACCE), DEFOG, and  
BACKLIGHT menu using the UP or DOWN button.  
Select WHITE BALANCE using the UP or DOWN button.  
You can change the white balance mode between ATW, AWC-SET, INDOOR, or OUTDOOR  
using the LEFT or RIGHT button.  
HSBLC: If the scene contains extremely bright light areas such as; from  
car headlight, the light can mask out much of the on-screen detail.  
ATW: Select this when the color temperature is between 2,400˚K and 11,000˚K.  
(Ex. A fluorescent lamp)  
AWC SET: The white balance is automatically adjusted in a specific luminance  
environment. To find the optimal luminance level for the current environment, point  
the camera towards a shoot of white paper and press the SET button.  
INDOOR: Select this when the color temperature is between 4,500˚K and 8,500˚K.  
OUTDOOR: Select this when the color temperature is between 1,700˚K and 11,000˚K.  
(Ex. sodium light inclusion)  
SELECT: Select the area to be enhanced (AREA1, AREA2, AREA3, AREA4)  
You can select the BLC area using UP, DOWM, LEFT or RIGHT button.  
DISPLAY: Display the zone or not and adjust the size and position.  
Select ON using LEFT and RIGHT button and press SET button to display  
the HSBLC area zone.  
POSITOIN: Adjust the position.  
MANUAL: Select this to fine-tune White Balance manually.  
You can adjust HSBLC area position UP, DOWN, LEFT or RIGHT button.  
SIZE : Adjust the size.  
You can adjust HSBLC area size sing UP, DOWN, LEFT or RIGHT button.  
You can adjust the blue and red tone level manually.  
LEVEL: Adjust level of the HLC function.  
BLUE: Adjust the blue tone of the image. (0~100)  
RED: Adjust the red tone of the image. (0~100)  
MODE: Select the HSBLC mode from NIGHT and ALL DAY.  
BLACK MASK: Enable/Disable BLACK MASK function.  
DEFAULT: Set the HSBLC setting value as default.  
SETUP  
HSBLC  
1. LENS  
DC  
SELECT  
DISPLAY  
LEVEL  
AREA1  
ON  
------45  
ALL DAY  
ON  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
ATW  
AUTO  
MODE  
POSITION  
BLACK MASK  
DEFAULT  
RETURN  
RET  
9. EXIT  
■ Because there can be a difference in the effectiveness of HSBLC according to the amount of light area  
in the screen, optimize the installation angle for the best HSBLC performance.  
■ HSBLC is only activated in low luminance condition if a bright area exceeds a designated size.  
■ HSBLC is not activated in day light or when bright light is not present at night.  
■ Set White Balance first by using the ATW or AWC mode. After that switch to MANUAL mode,  
■ White Balance may not work properly under the following conditions. In this case select the AWC mode.  
- When the ambient illumination of the subject is dim.  
- If the camera is directed towards a fluorescent light or is installed in place where illumination changes  
dramatically, the White Balance operation may become unstable.  
1080 HD-SDI Camera  
12  
 13  
1080 HD-SDI Camera  
DAY & NIGHT  
COLOR, B/W  
DAY & NIGHT  
AUTO, EXT  
Select DAY & NIGHT using the UP or DOWN button.  
Select DAY & NIGHT using the UP or DOWN button.  
You can change the day & night mode between COLOR, B/W, AUTO, or EXT using the LEFT  
or RIGHT button.  
You can change the day & night mode between COLOR, B/W, AUTO, or EXT using the LEFT  
or RIGHT button.  
AUTO: The mode is switched to COLOR in a normal environment, but switched  
to B/W mode when ambient illumination is low.  
COLOR: The picture is always displayed in color.  
B/W: The picture is always displayed in black and white.  
You can select and adjust DELAY, D N, and N D using the LEFT or RIGHT button.  
You can select and adjust BURST, IR SMART, IR LED, and IR PWM.  
BURST: Determines whether to transmit the burst signal or not .  
IR SMART: Decrease screen saturation of objects within a short range.  
DELAY: You can select day/night switching delay time from. (0s ~ 60s)  
D
N (AGC): Adjust the brightness of the lighting where the mode switch  
occurs from day to night.  
D (AGC): Adjust the brightness of the lighting where the mode switch  
LEVEL: Adjust level of the IR SMART function.  
AREA: Select the area to activate the IR SMART.  
You can select IR SMART area using the UP, DOWN, LEFT or RIGHT button.  
IR LED: Enable/Disable IR LEDs.  
N
occurs from night to day.  
IR PWM: Adjust the IR LEDs output level.  
SETUP  
DAY & NIGHT AUTO  
DELAY  
1. LENS  
DC  
---------5  
--------75  
--------35  
RET  
SETUP  
DAY & NIGHTIGHT  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
D
N
N (AGC)  
D (AGC)  
1. LENS  
DC  
BURST  
IR SMART  
IR LED  
IR PWM  
RETURN  
ON  
ON  
ON  
------40  
RET  
ATW  
AUTO  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
RETURN  
ATW  
AUTO  
6. SPECIAL  
7. ADJUST  
8. RESET  
9. EXIT  
9. EXIT  
IR SMART  
LEVEL  
AREA  
ETURN  
--------40  
RET  
■ EXT function is disabled.  
 
1080 HD-SDI Camera  
14  
15  
1080 HD-SDI Camera  
NR (Noise Reduction)  
2DNR, 3DNR  
SPECIAL  
CAM TITLE  
Select NR (NOISE REDUCTION) using the UP or DOWN button  
You can move the menu from 2DNR, 3DNR, LEVEL, and SMART IR and set each menu using  
the LEFT or RIGHT button.  
Select SPECIAL using the UP or DOWN button.  
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY, LANGUAGE,  
DEFECT, RS485, and VERSION using the UP or DOWN button.  
2DNR: Reducing noise in the brightness of the image.  
3DNR: Reducing noise causing by movement.  
- S-LEVEL: Set the start level of 3DNR function.  
- E -LEVEL: Set the end level of 3DNR function.  
LEVEL: Adjust noise reduction level.  
CAM TITLE: If you enter a title, the title will appear on the monitor.  
You can input the camera title from the virtual keyboard using the LEFT, RIGHT, UP, DOWN, and  
SET button.  
SETUP  
SPECIAL  
SMART NR: Activates & Deactivates 2DNR & 3DNR Automatically depends with  
environment.  
1. LENS  
DC  
CAM TITLE  
D-EFFECT  
MOTION  
PRIVACY  
LANGUAGE  
DEFECT  
RS485  
VERSION  
RETURN  
OFF  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
ATW  
AUTO  
OFF  
OFF  
ENG  
2D & 3D NR  
SETUP  
1. LENS  
DC  
2DNR  
ON  
ON  
--------70  
ON  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
3DNR  
LEVEL  
SMART NR  
RETURN  
ATW  
AUTO  
0C0C00  
RET  
9. EXIT  
RET  
9. EXIT  
CAM TITLE  
0
1
2
3
4
5
6
7
8 9  
K
A B C D E F G H I J  
L M N O P Q R S T U V  
W X Y Z → ← ↑ ↓ ( )  
¯
-
_
/
=
&
: ~ , .  
CLR P OS END  
- - - - - - - - - - - - - - -  
■ When adjusting the noise reduction level in the NR mode, remember that the higher the level set,  
the more the noise level will be reduced, as will the brightness of the image.  
 
1080 HD-SDI Camera  
16  
17  
1080 HD-SDI Camera  
SPECIAL  
D-EFFECT  
SPECIAL  
MOTION  
Select SPECIAL using the UP or DOWN button.  
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY,  
LANGUAGE, DEFECT, RS485, and VERSION using the UP or DOWN button.  
Select SPECIAL using the UP or DOWN button.  
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY, LANGUAGE,  
DEFECT, RS485, and VERSION using the UP or DOWN button.  
MOTION: This product has a feature that allows you to observe the object movement,  
and display <MOTION> indicator on the screen.  
You can select the digital effect mode from SELECT AREA, DISPLAY, SENSIVITY, MOTION VIEW, \  
and DEFAULT using the UP or DOWN button.  
D-EFFECT  
AUTO  
You can select the digital effect mode from FREEZE, MIRROR, D-ZOOM, and NEG.IMAGE  
10  
using the UP or DOWN button.  
SELECT AREA: You can select up to 3 motion detection areas.  
You can select the motion detection area using the LEFT or RIGHT button.  
DISPLAY: Adjust the size and position of the selected area.  
Select ON using LEFT and RIGHT button and press SET button to display the motion zone.  
- POSITOIN: Adjust the position.  
You can adjust the motion detection zone using the UP, DOWN, LEFT or RIGHT button.  
- SIZE: Adjust the size.  
You can adjust the motion detection size using the UP, DOWN, LEFT or RIGHT button.  
SENSITIVITY: Adjust the sensitivity of the motion detection.  
You can select the motion detection zone color using the LEFT or RIGHT button.  
MOTION VIEW  
FREEZE: You can stop the image or reactivate it.  
Select ON to freeze the image using the LEFT or RIGHT button.  
MIRROR: You can adjust or rotate the picture vertically and or horizontally.  
You can select the mirroring effect mode from MIRROR, V-FLIP, and ROTATE using the  
LEFT or RIGHT button.  
D-ZOOM: You can use a digital zoom of x1 ~ x64.  
Select ON using LEFT and RIGHT button and press SET button to display the DIGITAL  
ZOOM menu .  
NEG. IMAGE: You can flip the color on screen.  
You can select ON to display the motion detection.  
DEFAULT: Set the etting value as default.  
SETUP  
SPECIAL  
1. LENS  
DC  
CAM TITLE  
D-EFFECT  
MOTION  
PRIVACY  
LANGUAGE  
DEFECT  
RS485  
VERSION  
RETURN  
OFF  
SETUP  
SPECIAL  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
ATW  
AUTO  
1. LENS  
DC  
OFF  
OFF  
ENG  
CAM TITLE  
D-EFFECT  
MOTION  
PRIVACY  
LANGUAGE  
DEFECT  
RS485  
VERSION  
RETURN  
OFF  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
ATW  
AUTO  
OFF  
OFF  
ENG  
0C0C00  
RET  
9. EXIT  
0C0C00  
RET  
9. EXIT  
D-EFFECT  
MOTION  
FREEZE  
OFF  
OFF  
OFF  
OFF  
RET  
SELECT  
AREA1  
MIRROR  
D-ZOOM  
NEG. IMAGE  
RETURN  
DISPLAY  
ON  
SENSIVITY  
MOTION VIEW  
RETURN  
------48  
ON  
RET  
POSITION  
 
1080 HD-SDI Camera  
18  
19  
1080 HD-SDI Camera  
SPECIAL  
PRIVACY  
SPECIAL  
LANGUAGE  
Select SPECIAL using the UP or DOWN button.  
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY,  
LANGUAGE, DEFECT, RS485, and VERSION using the UP or DOWN button.  
Select SPECIAL using the UP or DOWN button.  
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY, LANGUAGE,  
DEFECT, RS485, and VERSION using the UP or DOWN button  
PRIVACY: Task an area you want to hide on the screen.  
You can select the digital effect mode from SELECT AREA, DISPLAY, COLOR, an  
UP or DOWN button.  
LANGUAGE: You can select the menu language according to your requirements.  
You can select the language from ENGLISH, JAPANESE, CHINESE1, and CHINESE2 using the  
LEFT or RIGHT button.  
O
OFF  
d
F
DEFAULT using the  
F
SELECT AREA: You can select up to 8 PRIVACY areas.  
You can select the privacy area using the LEFT or RIGHT button.  
RS-485: Using RS-485 communication, the camera menu can be accessed using  
System Controller or the DVR (Other Equipment).  
DISPLAY: Adjust the size and position of the selected area.  
Select ON using LEFT and RIGHT button and press SET button to display the privacy zone.  
- POSITOIN: Adjust the position.  
You can select the language from ENGLISH, JAPANESE, CHINESE1, and CHINESE2 using the LEFT  
or RIGHT button.  
You can adjust the privacy zone using the UP, DOWN, LEFT or RIGHT button.  
- SIZE: Adjust the size.  
You can adjust the privacy size using the UP, DOWN, LEFT or RIGHT button.  
COLOR: Determine area color. You can select 16 different colors.  
You can select privacy area color using the LEFT or RIGHT button.  
DEFAULT: Set the PRIVACY setting value as default.  
SETUP  
SPECIAL  
1. LENS  
DC  
CAM TITLE  
D-EFFECT  
MOTION  
PRIVACY  
LANGUAGE  
DEFECT  
RS485  
VERSION  
RETURN  
OFF  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
ATW  
AUTO  
OFF  
OFF  
ENG  
SETUP  
SPECIAL  
1. LENS  
DC  
CAM TITLE  
D-EFFECT  
MOTION  
PRIVACY  
LANGUAGE  
DEFECT  
RS485  
VERSION  
RETURN  
OFF  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
0C0C00  
RET  
9. EXIT  
ATW  
AUTO  
OFF  
OFF  
ENG  
SPECIAL  
SETUP  
1. LENS  
DC  
CAM TITLE  
D-EFFECT  
MOTION  
PRIVACY  
LANGUAGE  
DEFECT  
RS485  
VERSION  
RETURN  
OFF  
0C0C00  
RET  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
9. EXIT  
ATW  
AUTO  
OFF  
OFF  
ENG  
MOTION  
SELECT  
DISPLAY  
COLOR  
AREA1  
ON  
1
0C0C00  
RET  
9. EXIT  
POSITION  
DEFAULT  
RETURN  
RET  
■ RS-485 function is disabled.  
 
1080 HD-SDI Camera  
20  
21  
1080 HD-SDI Camera  
SPECIAL  
DEFECT  
ADJUST  
SHARPNESS  
Select SPECIAL using the UP or DOWN button.  
You can select the sub-menu from CAM TITLE, D-EFFECT, MOTION, PRIVACY, LANGUAGE,  
DEFECT, RS485, and VERSION using the UP or DOWN button.  
Select ADJUST using the UP or DOWN button.  
You can select the sub-menu from SHARPNESS, MONITOR, OSD, LSD, and  
NTSC/PAL using the UP or DOWN button.  
DEFECT: Sensors could have defects for something wrong in the process of their  
storage or manufacturing process. Such defects are called dead pixels, which  
SHARPNESS: As you increase this value, the picture outline becomes stronger and  
clearer. Adjust this value appropriately depending on the sharpness of the picture.  
You can select the sharpness mode from SHARPNESS, LEVEL, and resolution using the UP or  
DOWN button.  
OFF  
consist of two types: static dead pixel and dynamic dead pixel. The first can be  
OFF  
NTSC  
found from the beginning while the second is found over time after using sensors  
1080P  
for a certain period of time. Dynamic dead pixels may not be visible on the screen  
of ordinary illumination. However, they can be made visible by amplifying the  
ON  
SHARPNESS: Select ON to activate the SHARPNESS function.  
LEVEL: Adjust the level of the sharpness.  
RESOLUTION: Select ON to increase the image quality.  
analog/digital gain. Dead pixel correction (DPC) corrects such defects.  
You can select the defect correction mode from LIVE DPC and STATIC DPC using the UP or  
DOWN button.  
LIVE DPC: Auto Dead pixel correction  
LEVEL: Level of Auto Dead pixel correction  
STATIC DPC: Manual Dead pixel correction  
START: Start Dead pixel correction  
LEVEL: Level of Manual Dead pixel correction  
SENS-UP: Display Sens-Up Value  
SETUP  
ADJUST  
1. LENS  
DC  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
SHARPNESS  
MONITOR  
OSD  
LSC  
NTSC/PAL  
RETURN  
ATW  
AUTO  
LCD  
OFF  
NTSC  
RET  
SETUP  
SPECIAL  
1. LENS  
DC  
CAM TITLE  
D-EFFECT  
MOTION  
PRIVACY  
LANGUAGE  
DEFECT  
RS485  
VERSION  
RETURN  
OFF  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
9. EXIT  
ATW  
AUTO  
OFF  
OFF  
ENG  
SHARPNESS  
0C0C00  
RET  
9. EXIT  
SHARPNESS  
LEVEL  
ON  
----50  
ON  
RESOLUTION  
DEFECT  
LIVE DPC  
LEVEL  
STATIC DPC  
START  
ON  
--------30  
ON  
LEVEL  
SENS-UP  
RETURN  
--------40  
RET  
1080 HD-SDI Camera  
22  
 
23  
1080 HD-SDI Camera  
ADJUST  
MONITOR  
SPECIAL  
CAM TITLE  
Select ADJUST using the UP or DOWN button.  
You can select the sub-menu from SHARPNESS, MONITOR, OSD, LSD, and  
NTSC/PAL using the UP or DOWN button.  
Select ADJUST using the UP or DOWN button.  
You can select the sub-menu from SHARPNESS, MONITOR, OSD, LSD, and  
NTSC/PAL using the UP or DOWN button.  
OSD: You can adjust style of font.  
LSC: Lens shading compensation. Select ON to activate the brightness  
compensation on the corner of lens.  
MONITOR: Choose the appropriate setting for your monitor.  
You can select the monitor mode from LCD or CRT using the LEFT or RIGHT button.  
NTSC/PAL: Select video type from NTSC or PAL.  
LCD: Select this menu item when using an LCD monitor.  
You can select the sub-menu using the UP or DOWM button.  
- GAMMA: Select and adjust the gamma level.  
- BLUE: Adjust blue the gain level.  
SETUP  
ADJUST  
1. LENS  
DC  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
- RED: Adjust red the gain level.  
SHARPNESS  
MONITOR  
OSD  
LSC  
NTSC/PAL  
RETURN  
ATW  
AUTO  
CRT: Select this menu item when using an CRT monitor.  
You can select the sub-menu using the UP or DOWM button.  
- BLACK: Adjust the contrast level.  
LCD  
OFF  
NTSC  
RET  
- BLUE: Adjust blue the gain level.  
- RED: Adjust red the gain level.  
9. EXIT  
SETUP  
ADJUST  
1. LENS  
DC  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
SHARPNESS  
MONITOR  
OSD  
LSC  
NTSC/PAL  
RETURN  
SETUP  
ADJUST  
ATW  
AUTO  
LCD  
OFF  
NTSC  
RET  
1. LENS  
DC  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
SHARPNESS  
MONITOR  
OSD  
LSC  
NTSC/PAL  
RETURN  
ATW  
AUTO  
LCD  
OFF  
NTSC  
RET  
9. EXIT  
9. EXIT  
LCD  
CRT  
SETUP  
ADJUST  
GAMMA  
AUTO  
BLACK LEVEL  
BLUE GAIN  
RED GAIN  
RETURN  
IIIIIIIII +0  
IIIIIIIII 50  
IIIIIIIII 50  
RET  
1. LENS  
DC  
BLUE GAIN  
RED GAIN  
RETURN  
IIIIIIIII 50  
IIIIIIIII 50  
RET  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
6. SPECIAL  
7. ADJUST  
8. RESET  
SHARPNESS  
MONITOR  
OSD  
LSC  
NTSC/PAL  
RETURN  
ATW  
AUTO  
LCD  
OFF  
NTSC  
RET  
9. EXIT  
 
1080 HD-SDI Camera  
24  
25  
1080 HD-SDI Camera  
RESET  
TROUBLE SHOOTING  
PROBLEM  
SOUTION  
Select RESET using the UP or DOWN button.  
Check that the power cord and line connection between the camera and  
monitor are properly connected.  
RESET: Reset the camera settings to the factory defaults.  
Check that video cable is connected with the Analog BNC (Yellow).  
When the camera’s HD-SDI BNC output is directly connected to the  
monitor’s BNC terminal: Make sure the monitor supports HD-SDI signal input.  
When the camera’s HD-SDI BNC output is connected to the DVR: Make  
sure the DVR supports HD-SDIsignalinput.  
You can reset the camera setting using the SET button.  
Nothing appears on the screen.  
The image on the screen is dim.  
SETUP  
HD-SDI output is converted into other format such as DVI and VGA by  
using video converter: Make sure the converter’s HD-SDI input format  
1. LENS  
DC  
2. EXPOSURE  
3. WHITE BAL  
4. DAY & NIGHT  
5. NR  
ATW  
AUTO  
Is lens stained with dirt? Clean your lens with soft, clean cloth.  
Set the monitor to the propercondition.  
If the camera is exposed to very strong light, change the cameraposition.  
Re-adjust the back-  
6. SPECIAL  
7. ADJUST  
8. RESET  
The image onthe screenis dim, when  
the LED is on.  
Check if the LEDs are shaded and reflected by the cameraring,camerabase, or other  
objects near the camera.  
9. EXIT  
The LEDs are reflectedover the  
dome or cover.  
Check if the LEDs are shaded and reflected by the cameraring,camerabase, or other obje  
cts near the camera.  
Adjust the contrast feature of the monitor.  
The image on the screen is dark.  
If there is an intermediate device, set 75Ω properly; Check the termination.  
The camera is not working  
properly, and the surface of the  
camera is hot.  
Check that you have properly connected the camera to an appropriate  
power source.  
The SENS-UP function does not  
work.  
Check that AGC of EXPOSURE SETUP menu is ‘OFF’.  
The Motion Detection function  
does not work.  
Check that MOTION DET of SPECIAL SETUP menu is ‘OFF’.  
Color is not correct.  
Check the setting of WHITE BAL SETUP menu .  
Ensure the camera is not pointing towards the sun.  
Is the camera framing the sun or other bright light source?  
If there is an intermediate device, set 75OΩ properly; Check the termination.  
HD-SDI video may not appear to be normal if distanceexceedsthe  
maximum transferrable distance.  
The screen flickers continually.  
When a BNC cable adaptoris used to combine two or moreBNC cables  
for distributed HD-SDI video transfer, makesure the impedance of the  
adaptor is 75Ω. Otherwise, it may cause shorter transferdistance or  
broken video transfer.  
 
1080 HD-SDI Camera  
26  
27  
1080 HD-SDI Camera  

Land Pride Lawn Mower BB05 Series User Manual
Learning Resources Skin Care Product LER 2210 User Manual
LG Electronics DVD Player GSA 4165B User Manual
Life Fitness Home Gym 844 Lat Option User Manual
Mackie Musical Instrument 1604 VLZ3 User Manual
Magnavox TV VCR Combo MC194EMG User Manual
Mamp;S Systems Radio Antenna D 360 User Manual
Maytag Washer MAH2400AWW User Manual
Medion Camcorder MD80566 User Manual
Melissa Vacuum Cleaner 740 106 User Manual